NetXMS Forum

thank you! i can't wait any more

up,up

Hi!
  Today, i have tried to define a data collection configuration by: 
  "right click an object" -> "Data Collection Configuration" -> "New Table" -> "Columns" -> "Add",
  but i find the "SNMP OID" column can not be defined from scrach or edited anyway (in attachment images), is this not implemented yet or should be configured in other way? 
  Please give me some advice, thanks a lot!

Best Regards,

1.zip

Hi, Victor:

    I changed some menu in "Object Browser" into my mother language(Chinese) successfully,  but when I kill netxmsd process and reload it, I found a lot of messy code like some "?" in the "Object Browser",  But if I only close the java console without rebooting the server, everything is OK.
    I guess maybe the problem is in the following:
    1.  Server unicode supporting
    2.  Database character set
    3.  Before rebooting the server, some necessary database synchronization commands should be executed?
   
    I use Mysql to conserve data of the system, and set UTF-8 as the default character set. And in netxmsd.conf, I added "CodePage = UTF-8" configure line.
    Before make, I used "./configure --with-server --with-mysql --enable-unicode" command to complie server. Are there any other parameters needed in configure?
    Where is the problem, Please help, thank you!

Now, the line‘s color can change by the threshold value, but another question is how to set the interval of condition object? the default interval is too short to monitor in time.

Got it,Thanks

Hi, Victor
  I created a condition named "threshmonitor1" in "Infrastructure Services",  and set the properties, including "Events and Status"  and "Data".
In "Events and Status" , I set "Activation event" to SYS_TRESHOLD_REACHED" , set "Deactivation event" to SYS_THRESHOLD_REARMED", and set "Source object for events" to the swith which I want to monitor. Then, I set the Color of a line between two nodes, choosing "Based on object status" to "threshmonitor1",
although the Alarm of threshold value predefined poped up, the Color of the line didn't changed(Always Blue).

Please tell me what's the matter with the configuration? Thank you!

Best Regards

Hi! Victor,

    In 1.2.6 version,  I find the line's color can be set to based on object status, and I can choose netcard of a swith, but how can I set the color of a netcard according by the data rate?

    Thank you！

i have only executed "make clean" and not upgraded from old version, any other command can be used to delete old libs besides "make clean"?

thank you!

the result is same, any other compliing option?

thank you!!! i'll try it now

Hi,Victor
  after i excuted
  --------------------------------------------------------------------
  configure --with-server --with-snmp --with-mysql --enable-unicode
  make
  --------------------------------------------------------------------

  Errors information comed out in compling netxms-1.2.6, please check, thank you!

Making all in libnxsnmp
make[4]: Entering directory `/home/netxms-1.2.6/src/snmp/libnxsnmp'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/home/netxms-1.2.6/src/snmp/libnxsnmp'
Making all in nxmibc
make[4]: Entering directory `/home/netxms-1.2.6/src/snmp/nxmibc'
  CXXLD  nxmibc
../../libnetxms/.libs/libnetxms.so: undefined reference to `tre_regwexec'  --------------------this position!!!!!!!!!!
../../libnetxms/.libs/libnetxms.so: undefined reference to `tre_regwcomp'  --------------------this position!!!!!!!!!!
collect2: ld returned 1 exit status
make[4]: *** [nxmibc] error 1
make[4]: Leaving directory `/home/netxms-1.2.6/src/snmp/nxmibc'
make[3]: *** [all-recursive] error 1
make[3]: Leaving directory `/home/netxms-1.2.6/src/snmp'
make[2]: *** [all-recursive] error 1
make[2]: Leaving directory `/home/netxms-1.2.6/src'
make[1]: *** [all-recursive] error 1
make[1]: Leaving directory `/home/netxms-1.2.6'
make: *** [all] error 2

Hi, Victor：
  I have a suggestion for java console:

    I set a data collection to collect the in/out flow of a certain port in a switch, and when the flow exceeded the threshold value defined, an alarm of the swith (not the port)  will arise, and the link line between the swichs will change color to notice the network manager.
    The question is:  as the color changing condition is based on the object's status(object is the swith, not the port), so if I defined many collection actions and threshold value, then the swith's status will change by many conditions(this or that alarm), so the color of the link will not change exactly.
    How to settle this problem? I think,  if the port can arise alarm itself as the swith, then the color changing condition can be set to "based on the port's status", the color changing of a link line will also be more exactly.
    I hope this useful function will be considerd by you and your team!

    Best wishes!

Thank you! I'll try 1.2.2 again.

Hi, Victor:

    After I compiled the Java console 1.2.2, I tried to use the newest console, but when I created a new Network Map, I can not modify the background color of the new created map successfully (the default color is black), the printed screen picture is kept in the attachment for you.
  (because I do not have the "org.eclipse.core.resources-3.7.101*.jar", so I changed  "org.eclipse.core.resources;bundle-version="3.7.101"" to  "org.eclipse.core.resources;bundle-version="3.7.100"" to pass through compiling process. And I really don't know how this change will affect the result binary code.)

    But the network map's color of java console binary code downloaded from www.netxms.org is white and there is no button to modify the background color anyway, so I wonder whether the problem is due to the difference between my eclipse environment or jdk version and yours?

    the version of jdk I used is jdk1.7.0_02,
    and my eclipse version info is as follows:
   
    Eclipse SDK

Version: 3.7.1
Build id: M20110909-1335

(c) Copyright Eclipse contributors and others 2000, 2011.  All rights reserved.
Visit http://www.eclipse.org/platform

Please give me some advice, thank you very much!

problem-of-background-color.zip

Hi, Victor!
    I have uninstalled zest 1.3 and installed zest 2.0 successfully, but some errors comed out,
    and the errors look like mean: some package's version restriction can not been satisfied.
    for example, I find in the MANIFEST.MF, the "org.eclipse.core.resources;bundle-version="3.7.101" "  is marked by red cross, so I check my eclipse's plugin directory,  but only 3.7.100 version jar is found. Where can I get 3.7.101 version org.eclipse.core.resources jar? Can I set the variable to 3.7.100 to pass through compling process?
    ......
    I catched compling error pictures into the attachment error-complie.zip and marked the errors, please help me and give some advice! Thank you!

    I'm waiting for your reply online...

Best Regards,

error-compile.zip

Hi! Victor,
 
    I have failed to compile the new edition java console (1.2.2) in the old eclipse compiling environment, in which the old edition java console(1.2.1) can be complied successfully, some pictures I copied into the attachment.

    I guess some plug-in units are missed or should be upgraded to new version?
    Then I tried to install Zest plug-in to eclipse online, but failed, and error info as follows:
---------------------------------------------------------------------------------------------
Your original request has been modified.
  "Graphical Editing Framework Zest Visualization Toolkit SDK" is already installed, so an update will be performed instead.
Cannot complete the install because of a conflicting dependency.
  Software being installed: Graphical Editing Framework Zest Visualization Toolkit SDK 2.0.0.201208101911 (org.eclipse.zest.sdk.feature.group 2.0.0.201208101911)
  Software currently installed: Graphical Editing Framework Zest Visualization Toolkit 1.3.0.v20110425-2050-67A08yF5F18CBD4I9G53365 (org.eclipse.zest.feature.group 1.3.0.v20110425-2050-67A08yF5F18CBD4I9G53365)
  Only one of the following can be installed at once:
    Graphical Editing Framework Zest Core 1.3.0.201206112118 (org.eclipse.zest.core 1.3.0.201206112118)
    Graphical Editing Framework Zest Core 1.3.0.v20110221-2050 (org.eclipse.zest.core 1.3.0.v20110221-2050)
    Graphical Editing Framework Zest Core 1.2.0.v20101209-2020 (org.eclipse.zest.core 1.2.0.v20101209-2020)
    Graphical Editing Framework Zest Core 2.0.0.201208101911 (org.eclipse.zest.core 2.0.0.201208101911)
    Graphical Editing Framework Zest Core 1.2.0.v20100525-1225 (org.eclipse.zest.core 1.2.0.v20100525-1225)
    Graphical Editing Framework Zest Core 1.1.0.v20090504-1850 (org.eclipse.zest.core 1.1.0.v20090504-1850)
    org.eclipse.zest.core 1.0.0.v20080115
  Cannot satisfy dependency:
    From: Graphical Editing Framework Zest Visualization Toolkit 1.3.0.v20110425-2050-67A08yF5F18CBD4I9G53365 (org.eclipse.zest.feature.group 1.3.0.v20110425-2050-67A08yF5F18CBD4I9G53365)
    To: org.eclipse.zest.core [1.3.0.v20110221-2050]
  Cannot satisfy dependency:
    From: Graphical Editing Framework Zest Visualization Toolkit SDK 2.0.0.201208101911 (org.eclipse.zest.sdk.feature.group 2.0.0.201208101911)
    To: org.eclipse.zest.core [2.0.0.201208101911]   
---------------------------------------------------------------------------------------
 
Please give me some advice, thank you!

error.zip

Good job!

up 

Hi, Victor:
  I am using version 1.2.0 server and java console, Network Topology is set to "Active and passive", pertinent parameters of filter are set as following picture.

  But after 2 hours, I found duplicate node were found by the server and displayed in the java console(in following picture).