Configuring an Instance-DCI there is the possibility to configure the display the values of the discoverd DCIs within Performance-tab.
Is there a possibility to configure the values in two or more groups depending on a script that fills the values for title and group?
I tried something like in attached file, but it did not work.
Best regards
It seems that SNMP has some problems on the PDU when it receives requests for OIDs that are not fully implemented.
I changed the snmp-Testoid to 1.3.6.1.4.1.19536.10.1 using the Custom Attribute "snmp.testoid".
Capabilities detection and DCIs for temperature using SNMPv2 and SNMPv3 include alarm generation now work as expected. Now implementing DCIs for current amps and volts and alarming for this.
Helleo together,
it seems that there is a problom withn the legend in linecharts. The values within the "Curr" column seem to be wrong. For illustration screenshots attached from "Performance"-Tab and dedicated Linechart.
Best regards
Georg
I did the first request out of capture for full configuration poll and got following results:
nxsnmpget -v 3 -u xxxxx IP 1.3.6.1.2.1.1.2.0
1.3.6.1.2.1.1.2.0 [OBJECT IDENTIFIER]: 1.3.6.1.4.1.19536.10.1
// Value seems to be OK as the PDU comes from Panduit
nxsnmpget -v 3 -u xxxxx IP 1.3.6.1.2.1.1.1.0
1.3.6.1.2.1.1.1.0 [STRING]: SN:PDU Metered PN:Device Model:P30D05M Rating:346-415V, 16A, 11.0kVA, 50/60Hz
// Value is OK
nxsnmpget -v 3 -u xxxxx IP 1.3.6.1.4.1.35160.1.1.0
1.3.6.1.4.1.35160.1.1.0 [NULL]:
// I don't know why this OID is requested it seems that it has nothing to do with Panduit
nxsnmpget -v 3 -u xxxxx IP 1.3.6.1.6.3.15.1.1.4.0
1.3.6.1.6.3.15.1.1.4.0 [NULL]:
// This is the OID from the report
it seems that the next calls to the device are done with global configured authtenticationparameters as they are encrypted. Within nodeconfiguration I have configured authentication parameters for that host.
nxsnmpget -v 3 -u xxxxx IP 1.3.6.1.2.1.1.3.0
1.3.6.1.2.1.1.3.0 [TIMETICKS]: 866125100
// Result for this request returned that is done as the last SNMP-Request in packet-capture
So it seems to be odd why the PDU is nor recognized as SNMP capable...
Best regards
Georg
I captured data for two situations:
1.) Configuration poll (full poll)
2.) nxsnmpget for special OID
Capturing a DCI-Poll (Forced Poll) gave me an empty file. I think the poll was not done, because netxms was not able to detect SNMP capabilities at configuration poll.
@Filipp: I will send You a downloadlink as PM
Helle together,
it is even more than two month I got many of these logentries:
2025.11.01 00:02:22.882 *E* [db.drv ] SQL query failed (Query = "INSERT INTO nodes (primary_ip,primary_name,snmp_port,capabilities,snmp_version,community,agent_port,secret,snmp_oid,uname,agent_version,platform_name,poller_node_id,zone_guid,proxy_node,snmp_proxy,icmp_proxy,required_polls,use_ifxtable,usm_auth_password,usm_priv_password,usm_methods,snmp_sys_name,bridge_base_addr,down_since,driver_name,rack_image_front,rack_position,rack_height,physical_container_id,boot_time,agent_cache_mode,snmp_sys_contact,snmp_sys_location,last_agent_comm_time,syslog_msg_count,snmp_trap_count,node_type,node_subtype,ssh_login,ssh_password,ssh_key_id,ssh_port,ssh_proxy,port_rows,port_numbering_scheme,agent_comp_mode,tunnel_id,lldp_id,fail_time_snmp,fail_time_agent,fail_time_ssh,rack_orientation,rack_image_rear,agent_id,agent_cert_subject,hypervisor_type,hypervisor_info,icmp_poll_mode,chassis_placement_config,vendor,product_code,product_name,product_version,serial_number,cip_device_type,cip_status,cip_state,eip_proxy,eip_port,hardware_id,cip_vendor_code,agent_cert_mapping_method,agent_cert_mapping_data,snmp_engine_id,snmp_context_engine_id,syslog_codepage,snmp_codepage,ospf_router_id,mqtt_proxy,modbus_proxy,modbus_tcp_port,modbus_unit_id,vnc_password,vnc_port,vnc_proxy,path_check_reason,path_check_node_id,path_check_iface_id,expected_capabilities,id) VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?) ON DUPLICATE KEY UPDATE primary_ip=VALUES(primary_ip),primary_name=VALUES(primary_name),snmp_port=VALUES(snmp_port),capabilities=VALUES(capabilities),snmp_version=VALUES(snmp_version),community=VALUES(community),agent_port=VALUES(agent_port),secret=VALUES(secret),snmp_oid=VALUES(snmp_oid),uname=VALUES(uname),agent_version=VALUES(agent_version),platform_name=VALUES(platform_name),poller_node_id=VALUES(poller_node_id),zone_guid=VALUES(zone_guid),proxy_node=VALUES(proxy_node),snmp_proxy=VALUES(snmp_proxy),icmp_proxy=VALUES(icmp_proxy),required_polls=VALUES(required_polls),use_ifxtable=VALUES(use_ifxtable),usm_auth_password=VALUES(usm_auth_password),usm_priv_password=VALUES(usm_priv_password),usm_methods=VALUES(usm_methods),snmp_sys_name=VALUES(snmp_sys_name),bridge_base_addr=VALUES(bridge_base_addr),down_since=VALUES(down_since),driver_name=VALUES(driver_name),rack_image_front=VALUES(rack_image_front),rack_position=VALUES(rack_position),rack_height=VALUES(rack_height),physical_container_id=VALUES(physical_container_id),boot_time=VALUES(boot_time),agent_cache_mode=VALUES(
agent_cache_mode),snmp_sys_contact=VALUES(snmp_sys_contact),snmp_sys_location=VALUES(snmp_sys_location),last_agent_comm_time=VALUES(last_agent_comm_time),syslog_msg_count=VALUES(syslog_msg_count),snmp_trap_count=VALUES(snmp_trap_count),node_type=VALUES(node_type),node_subtype=VALUES(node_subtype),ssh_login=VALUES(ssh_login),ssh_password=VALUES(ssh_password),ssh_key_id=VALUES(ssh_key_id),ssh_port=VALUES(ssh_port),ssh_proxy=VALUES(ssh_proxy),port_rows=VALUES(port_rows),port_numbering_scheme=VALUES(port_numbering_scheme),agent_comp_mode=VALUES(agent_comp_mode),tunnel_id=VALUES(tunnel_id),lldp_id=VALUES(lldp_id),fail_time_snmp=VALUES(fail_time_snmp),fail_time_agent=VALUES(fail_time_agent),fail_time_ssh=VALUES(fail_time_ssh),rack_orientation=VALUES(rack_orientation),rack_image_rear=VALUES(rack_image_rear),agent_id=VALUES(agent_id),agent_cert_subject=VALUES(agent_cert_subject),hypervisor_type=VALUES(hypervisor_type),hypervisor_info=VALUES(hypervisor_info),icmp_poll_mode=VALUES(icmp_poll_mode),chassis_placement_config=VALUES(chassis_placement_config),vendor=VALUES(vendor),product_code=VALUES(product_code),product_name=VALUES(product_name),product_version=VALUES(product_version),serial_number=VALUES(serial_number),cip_device_type=VALUES(cip_device_type),cip_status=VALUES(cip_status),cip_state=VALUES(cip_state),eip_proxy=VALUES(eip_proxy),eip_port=VALUES(eip_port),hardware_id=
VALUES(hardware_id),cip_vendor_code=VALUES(cip_vendor_code),agent_cert_mapping_method=VALUES(agent_cert_mapping_method),agent_cert_mapping_data=VALUES(agent_cert_mapping_data),snmp_engine_id=VALUES(snmp_engine_id),snmp_context_engine_id=VALUES(snmp_context_engine_id),syslog_codepage=VALUES(syslog_codepage),snmp_codepage=VALUES(snmp_codepage),ospf_router_id=VALUES(ospf_router_id),mqtt_proxy=VALUES(mqtt_proxy),modbus_proxy=VALUES(modbus_proxy),modbus_tcp_port=VALUES(modbus_tcp_port),modbus_unit_id=VALUES(modbus_unit_id),vnc_password=VALUES(vnc_password),vnc_port=VALUES(vnc_port),vnc_proxy=VALUES(vnc_proxy),path_check_reason=VALUES(path_check_reason),path_check_node_id=VALUES(path_check_node_id),path_check_iface_id=VALUES(path_check_iface_id),expected_capabilities=VALUES(expected_capabilities),id=VALUES(id)"): Data too long for column 'lldp_id' at row 1
Checking the database with nxdbmgr does not report any errors.
Using version 5.2.8 with mariadb on debian
Best regards
Georg
Hello together,
my current version of netxms is 5.2.8 on debian, I'm currently migrating my monitoring to.
I had implemented SNMP-requests to panduit G5 PDUs some time ago in a netxms-version 4.x and it worked fine even with some updates of netxms to current version.
Currently I did a firewareupdate on that PDU and afterwards a full configuration poll for the corresponding node. Within that poll netxms was not able checking running SNMP agent and doing a capability-update. (Testing it with a PDU that had an other firmwareversion same thing happend.) From that time on it got more strange:
This bahavor is the same for SNMP v2c and v3. To simplyfy the problem I deactivated all encryption staff from v3.
As I have an old installation from netxms (Version 2.0.5) I added a node there and it all worked fine! (detection of node capabilities and DCI-Requests)
I do not know how to get it working on version 5.2.8 I'm currently migrating to.
Best regards
Georg
Hello everyone,
I have a question:
Has anyone done some integration/synchronisation of data between NetBox and NetXMS?
Till now I only have found some integrations of NetBox only with some other monitoring-systems.
Best regards
Georg
At my installation I have two folders .nxmc and .nxmc4 on Windows10
There is a very old client installed (Netxms 2.0.5) where it seemes that it is using .nxmc and a newer client beginning with 4.x that was upgraded to 5.0x as next version of monitoring server which uses folder .nxmc4. Deleting .nxmc4 helped me solving same problem redlam had.
Does this mean, that using OIDs in SNMP-requests as functionparameter also have to be done without leading "."?
What is the behavior if result of a SNMP-request is an OID itsself? Is this value returned without leading "."?
At my installation I'm using a networkmap for every floor with a jpg or png image as background and some other informations. These images are of different sizes. Til now it worked fine getting the image from image-library and it was displayed perfectly.
With version 5.0.1 mapsize within map properties has to be changed from width=0 and height=0 to a value that fits imagesize to be displayed correctly.
Is this a bug or intended behavior?
If this is intended behavior I have to change the values for many, many maps....
It is possible configuring rights for editing Maintenancejournal from within objectproperties of "Infrastructure Services".
Is there a possibility editing these rights from within user and group definitions at "User and groups"?
Hello together,
configuring different community-strings for read and write access is a common solution on SNMP-servers.
What is the way to implement the usage of a seperate community-string for SNMP-set-access to networkcomponents from within NetXMS.
Best regards
Georg
Passiv PDUs that are mounted at front or back of the rack can be documented within "Passive Elements". PDUs that are 19"-mountable and active managed can be placed at the HE as mounted.
Many larger PDUs are mounted vertically within rack (managed or unmanaged). Would it be possible to expand the logic for rack-definitions the way that these PDUs are documentable for a rack?
Thanks for the info. That helps me very much, concerning data I want to access within action message text!
But I got an other problem that I don't what goes wrong.
In message text I am calling a function this way %[NMSRV::test/testfkt1("p1","p2","p3","p4")] for test this is a very simple function with this definition in NMSRV::test :
function testfkt1(pm1,pm2,pm3,pm4)
{ retval = "Param1: "..pm1.." Param2:"..pm2.." Param3:"..pm3.." Param4:"..pm4;
return (retval);
}
The resulting message differs from expected result. Generated value from this function is:
Param1: Param2:p1 Param3:p2 Param4:p3
It seems, that there is a shift of parameters when script is called from message text. I tested it with two different installations of NetXMS Version 4.4.3.
Best regards
Georg
Within action messsage text it is possible to use the %[name] macro for generating output to message-text. The called funktion can have parameters. That works fine.
The problem I want to solve is:
Who to use the values of other macros as parameter for the function. E.g. %[script/myfunct(%z,%a,%c)] with the values of %z, %a and %c. The first tests I did are resulting in the strings "%z", %a" and "%c" that are passed to called function.
Who can I achieve that values of macros are passed to the function?
Best regards
Goerg
Having an environmental Control unit where it is not possible to change sensornames via webgui I want to create a form from within netxms-gui where all connected sensors are listed with theire type (temperature, humidity, leakage). Within this form user should have the possibility to name the sensors and the data should be written via SNMP-set to the unit.
For user-convinience this should be done to for all used controller-units, even if there is possibility to change these data via web.
It would bee interesting applying some other data to the sensors like warning temperatur-settings individually per sensor with the same procedure.
Best regards
Georg
With NXSL it is possible to generate an output with "println" to the client.
Is there a possibility to create an input-window from an nxsl-script where an input can be requested with an individual description (value=readln("Please insert a value:")). Something like You have implemented with objecttools "InputFileds" but even generated as a result of some script-calculation.
Best regards
Georg
There is a perl script called mysqltuner that helps very much identifying unused space within the tables that will lead to large files in the database.
Especially after changing some RetentionTimers and deleting some records via housekeeper you will see spaces there where you can shrink databasesize.
Sometimes it is good identifying unused tabels via nxdbmgr.
Hello Filipp,
I followed Your advice and looked at the length of the array in called function and in calling function. Value was the same both times e.g. 4.
Reducing and testing code via calling the script as serverscript from a device. This scriptlib has the subs and a "main"-function that calls the subs. With reduced code resulting string appears in the calling-function. After introducing some more calculation in called function the problem appears once more with the following results:
NT_lib_InstDisc::int_InstDisc_01 called with: ##---#nsnsnsn bhohofewho
NT_lib_Parsers::Parse_Interface_Alias_Prefix called with: ##---#nsnsnsn
Parse_Interface_Alias_Prefix IN default:13 ##---#nsnsnsn
NT_lib_Parsers::Parse_Interface_Alias_Prefix returns Values (hashash;has2hash;hasparams;param;;arraylength):1;1;1;---;;4;
Error 15 in line 37: Unknown object's attribute
Some times automatic server-restart followed.
Putting a trace command directly in front of building retval changed situation and function worked as expected.
WITH LINE 135 NOT COMMENTED OUT:
NT_lib_InstDisc::int_InstDisc_01 called with: ##---#nsnsnsn bhohofewho
NT_lib_Parsers::Parse_Interface_Alias_Prefix called with: ##---#nsnsnsn
Parse_Interface_Alias_Prefix IN default:13 ##---#nsnsnsn
NT_lib_Parsers::Parse_Interface_Alias_Prefix param:---
NT_lib_Parsers::Parse_Interface_Alias_Prefix returns Values (hashash;has2hash;hasparams;param;;arraylength):1;1;1;---;;4;
In int_InstDisc_01 Return Values from Parse_Interface_Alias_Prefix: 1;1;1;---;;4;
As of this You will find complete code I wrote as attachment, because I don't know where my error is.
Best regards
Georg
