NetXMS Forum

I second that

Hi thanks for a great product, and Thank you for the new maintenance mode! its great!
one question, is there anyway to trigger maintenance mode for a node remotely with script, i was thinking along the lines of monitor event log on node and on server reboot (if its related to server patch) then i would trigger a 15 minute maintenance window. is this do able?

regards!

i am using snmp v2 and netxms version 1.2.16

I still have this issue, all other switches are monitored with snmp except this one, and as stated, i can monitor this switch with other snmp aware products, so this leeds me to belive that the netxms db is in someway corrupted regarding this node, is there someway to clean up after a corrupted node discovery?

Hi

I have a number af Procurve switches that i would like to monitor with Netxms, some 5406zl and some 8212zl models

now my problem is this, i have added 2 8212zl nodes and one is monitored correctly in netxms the other one is not. i know that snmp works correctly on both. I have other monitoring software that are able to communicate with both.

It looks like there was a problem with either switch or netxms or both the first time i tried to add the switch that does not monitor correctly, and now even though i remove and readd the node it still wont use snmp for communication.

is there a way to completely remove a node with all informations from the db or do i have to reintall netxms? and if so is there a way to export / import all my other functioning nodes and dci's / template - the works?

Hi i just updated webui with version 1.2.7 to match the new server core binary, but when i open the site in my browser all i get is a blank grey page with title Netxms management Console, and then nothing, Ive tried to uninstall / reinstall webui since the first installation was an upgrade from 1.2.6 but it doesn't help. andy ideas?

Oh yeah and another "funny" thing, when i start the webui service, it immediately uses 100% cpu, and keeps on doing that, for however long i let the service run.

argh - sorry i had the "" at the wrong place, this offcource : System.ServiceState("Lotus Domino Server (ProgramFilesLotusDominodata)") works just fine..

sorry

Hi

I realise that this is an old thread, but i have just stumbled upon the same issue, i want to monitor an lotus domino server, and the service name (not display name) contains ( ) and there fore i cannnot get a service state and encapsulation the service name with "" doesn't help any ideas?

Regards

Hi

After playing around with the new webui i noticed in the configfile an option for a secure web listener on port 8443 but when using that port i get no response from webserver, is this not implemented yet or do i need to setup something more than default in ordet to use this?

furthermore is it - or will it be - possible to use ldap / active directory / radius logon with this new webservice - or alternative maybe to provide option to store login in cookie and then use a url in an alert som that one can click on this link and see more details on the alert from the webview?

Regards

Iphone client would be nice, the new web interface is very usable on ipad 2 but not as much on iphone due to the limited screen size

Finally got it to work, i was missing the JAVA_HOME path in my system settings for the OS

i have now tried to install the JRE from oracle but still no luck

@alk said in NetXMS 1.2.0 released:

There are two options:

1. When installing WebUI, select "JRE" option in installer
2. Install JRE from Oracle: http://www.oracle.com/technetwork/java/javase/downloads/jre-7u3-download-1501631.html

@goriem said in NetXMS 1.2.0 released:

I have upgraded core server from 1.1 without problem, but when installing the new webservice webui it wont start, it states in teh log that it cannot find the jave jre enviroment:

Hi

I did ofcource opt to install the JRE inviroment but it doesn't work im installing on windows 2008 r2 on a vmware host

Hi Awsome news with the new version

I have upgraded core server from 1.1 without problem, but when installing the new webservice webui it wont start, it states in teh log that it cannot find the jave jre enviroment:

[2012-04-20 08:48:38] [debug] ( prunsrv.c:1644) Commons Daemon procrun log initialized
[2012-04-20 08:48:38] [info]  ( prunsrv.c:1648) Commons Daemon procrun (1.0.9.0 64-bit) started
[2012-04-20 08:48:38] [debug] ( prunsrv.c:559 ) Installing service...
[2012-04-20 08:48:38] [info]  ( prunsrv.c:595 ) Service nxWebUI name NetXMS WebUI
[2012-04-20 08:48:38] [debug] ( prunsrv.c:611 ) Setting service description NetXMS Web Interface (jetty)
[2012-04-20 08:48:38] [info]  ( prunsrv.c:629 ) Service 'nxWebUI' installed
[2012-04-20 08:48:38] [info]  ( prunsrv.c:1729) Commons Daemon procrun finished
[2012-04-20 08:48:38] [debug] ( prunsrv.c:1644) Commons Daemon procrun log initialized
[2012-04-20 08:48:38] [info]  ( prunsrv.c:1648) Commons Daemon procrun (1.0.9.0 64-bit) started
[2012-04-20 08:48:38] [info]  ( prunsrv.c:720 ) Starting service 'nxWebUI' ...
[2012-04-20 08:48:38] [debug] ( prunsrv.c:1644) Commons Daemon procrun log initialized
[2012-04-20 08:48:38] [info]  ( prunsrv.c:1648) Commons Daemon procrun (1.0.9.0 64-bit) started
[2012-04-20 08:48:38] [info]  ( prunsrv.c:1561) Running 'nxWebUI' Service...
[2012-04-20 08:48:38] [debug] ( prunsrv.c:1345) Inside ServiceMain...
[2012-04-20 08:48:38] [error] ( prunsrv.c:1405) Unable to find Java Runtime Environment.
[2012-04-20 08:48:38] [error] ( prunsrv.c:1405) The system could not find the environment option that was entered.
[2012-04-20 08:48:41] [error] ( prunsrv.c:741 ) Failed to start 'nxWebUI' service
[2012-04-20 08:48:41] [error] ( prunsrv.c:741 ) The data area passed to a system call is too small.
[2012-04-20 08:48:41] [info]  ( prunsrv.c:749 ) Start service finished.
[2012-04-20 08:48:41] [error] ( prunsrv.c:1720) Commons Daemon procrun failed with exit value: 5 (Failed to start service)
[2012-04-20 08:48:41] [error] ( prunsrv.c:1720) The data area passed to a system call is too small.
[2012-04-20 08:58:34] [debug] ( prunsrv.c:1644) Commons Daemon procrun log initialized
[2012-04-20 08:58:34] [info]  ( prunsrv.c:1648) Commons Daemon procrun (1.0.9.0 64-bit) started
[2012-04-20 08:58:35] [info]  ( prunsrv.c:1561) Running 'nxWebUI' Service...
[2012-04-20 08:58:35] [debug] ( prunsrv.c:1345) Inside ServiceMain...
[2012-04-20 08:58:35] [error] ( prunsrv.c:1405) Unable to find Java Runtime Environment.
[2012-04-20 08:58:35] [error] ( prunsrv.c:1405) The system could not find the environment option that was entered.

any ideas how to fix this?

thankyou for a great product

sorry i have nowhere to store image online right now - but my threshold is set to:

This threshold will be activated if last polled value for 1 consecutive samples will be greater or equal than 30

repeat event Use default settings

I ended up solving it via externalparameter, wrote a vb script to parse the value from the weblog and returning it to the node works like a charm allthough i had to restart the Netxms core server before i could "rearm" the value when falling below configured threshold.

Thankyou Victor for your reply - do you have any links to this sort of thing - using nxpush and scripting to get values? - i have searched the forum but i might not know what to search for. i quite new with this advanced (for me anyway) usage of Netxms

Hi

i have a temperature monitoring device that logs temperature to an onboard log file accessible over web like this : http://ipadress/spilog.txt

i logs the temperature ever 5 minutes in this format:

2012/03/23;09:35:00;0;3;3;1;0;2;0;3;0;
2012/03/23;09:35:00;0;4;2;151;0;152;0;
2012/03/23;09:40:00;0;0;1;59300;276;
2012/03/23;09:40:00;0;3;3;1;0;2;0;3;0;
2012/03/23;09:40:00;0;4;2;151;0;152;0;
2012/03/23;09:45:00;0;0;1;59300;276;
2012/03/23;09:45:00;0;3;3;1;0;2;0;3;0;
2012/03/23;09:45:00;0;4;2;151;0;152;0;
2012/03/23;09:50:00;0;0;1;59300;277;
2012/03/23;09:50:00;0;3;3;1;0;2;0;3;0;
2012/03/23;09:50:00;0;4;2;151;0;152;0;
2012/03/23;09:55:00;0;0;1;59300;276;
2012/03/23;09:55:00;0;3;3;1;0;2;0;3;0;
2012/03/23;09:55:00;0;4;2;151;0;152;0;
2012/03/23;10:00:00;0;0;1;59300;275;
2012/03/23;10:00:00;0;3;3;1;0;2;0;3;0;
2012/03/23;10:00:00;0;4;2;151;0;152;0

now i would like to collect info from: where i can identify the temp monitor and current value
2012/03/23;10:00:00;0;0;1;59300;275;
device---------------------------^
current value----------------------------^  <- in this case the temperature is 27,5 degrees celcius

what approach is the best in order log log and alert based upon these values?

regards

Hi
thanks for your reply i had hoped to accomplish this a "smarter" way, by getting my alert action to evaluate upon status of my internetaccess so that i did not need two events for every alert but this aproach will work, you're quite right.

thankyou

Hi

my question is this:
can i scipt an action that chooses between sendiing sms or execute command depending on status of a situation?

i have an action for sending sms and an action that sends an online notification to my notifo account via curl

i also have a situation evaluation if there is internet access called internetaccess - i have used this to evaluate if a ping to an external host should generate an alarm based upon avaliability of my router and firewall.

i would like my action to notify me via the execute command action when there is internet access but then to default to sending sms when no internet is accessible.

is this possible and if it is - how do i do this in the smartest way?

regards