Hi,
Thanks for your reply
The only thing that i can see in my trap-log is the following when a BGP session goes down and none of the vars have data in the that looks like and IP address.
.1.3.6.1.2.1.15.7.2
var: .1.3.6.1.1.3.0
.1.3.6.1.6.3.1.14.1.0
1.3.6.1.2.1.15.7.2
1.3.6.1.2.1.15.3.1.14.A.B.C.D
1.3.6.1.2.1.15.3.1.2.10.10.4.201
1.3.6.1.6.3.1.1.4.3.0
Regards
Johan
Hi,
Is is possible to graph bits per seconds instead of Bytes/s?
Regards
Johan
Hi,
I'm trying to setup traps for BGP-sessions, and I've managed to get netxms to set alarm when they go up/down. My problem is that I want the neighbor that went down to be in the alarm.
I can see the following in my SNMP traps log:
Trap OID: .1.3.6.1.2.1.15.7.2
Varbinds:
...;.1.3.6.1.2.1.15.3.1.14.10.2.4.7
The peer in this case 10.2.4.7 seems to be included in the Varbind/OID, is there some way to extract this in netxms?
Regards
Johan
Hi,
I forgot to restart the server deamon, I can see traps now.
Do I need to manually add all possible traps? I added (via nxmibc) a lot of Juniper mibs, can't netxms automatically identify them, or where can I see my imported mibs?
Regards
Johan
I can also see that traps i arriving to my netxms system.
17:50:11.046342 IP (tos 0x0, ttl 63, id 36880, offset 0, flags [none], proto: UDP (17), length: 169) 1.1.1.1..63077 > 2.2.2.2.snmptrap: { SNMPv2c C=public { V2Trap(127) R=297506224 system.sysUpTime.0=305468639 [|snmp] } }
17:50:43.049687 IP (tos 0x0, ttl 63, id 36966, offset 0, flags [none], proto: UDP (17), length: 169) 1.1.1.1.63077 > 2.2.2.2.snmptrap: { SNMPv2c C=public { V2Trap(127) R=297506267 system.sysUpTime.0=305471840 [|snmp] } }
17:50:43.073372 IP (tos 0x0, ttl 63, id 36972, offset 0, flags [none], proto: UDP (17), length: 169) 1.1.1.1.63077 > 2.2.2.2.snmptrap: { SNMPv2c C=public { V2Trap(127) R=297506268 system.sysUpTime.0=305471842 [|snmp] } }
I can see the following listening ports:
tcp 0 0 *:mysql *:* LISTEN
tcp 0 0 *:4700 *:* LISTEN
tcp 0 0 *:4701 *:* LISTEN
tcp 0 0 *:http *:* LISTEN
tcp 0 0 *:ssh *:* LISTEN
Hi,
I'm new to netxms and I'm trying to get snmp traps to work. I have a device that is sending traps but netxms is not registering anything. EnableSNMPTraps is set to 1 on my control panel.
I don't quite understand how to use netxms, for example graphing, do i really need to right click on every DCI to graph or can I get a page for a host that graps all interfaces?
Is there a way to automatically create DCI's for all interfaces on a host, I found a guide on this forum but I don't quite understand how to add all interfaces to a template.
Regards
Johan
