NetXMS Forum

Hi, i am requesting another feature, which seems like changing DCI container color with DCI value change.
Is it possible to include the option of defining a bandwidth max and load on links on the map?
This screenshot is from another monitoring software which is about to be replaced by NetXMS.

Thank you.

Hope this would be available in the next release.

Regards

i configured Proxy IP address in general for the computer, (Control panel, Internet Options) to download geo maps.

Hello,

I have a DCI Container in the Map displaying the temperature of the Datacenter. Which i get it from SNMP object of an HP server.
I want to know, if it is possible to change its color if the threshold defined in the DCI is reached.

Thanks in advance.
========
Current version : 2.0.5

Problem resolved!
Many thanks to Virctor, who helped me so much.

Hello, did you receive information I sent you, Virctor?
Regards.

I sent you contact information for Teamviewer in private message.
Thanks in advance.

Thank you for your reply,
I really feel confused right now, because, even Servers (MS Windows Server) that i want to monitor with SNMP, their SNMP information (OBJECT OID,...) are not displayed.
Victor, for the access, the router is not published on internet. and that might be refused here, but i can manage to give you access with Teamviewer if you permit. We make an appointment so both of us would be connected, and you'll have access.

Thank you for your reply, I already tested changing the "Use ifXTable for interface polling" parameter. What i noticed yesturday, that interfaces were read once, but when i tryed to force full configuration polling again, everything was lost.

Besides, i already changed the 3750, to 7200.

Here is the result of the command "debug snmp packets" i used to see if there's communication between NetXMS server and that router.

netxms-snmp-2.txt

I rebuilt NetXMS environnement with a fresh install of the OS, SQL and a different router, but always the same result.
I don't know what i am missing..

Here is another log file after about 4 hours, thought that might contain more information.

R2.xlsx

It would be great if the Maps in the Web Console can have tooltips just like the installed console.
That helps having a quick overview about what's hapenning.

Regards

Hello Sir,
I set the debug level to 6 and re-run polling on node R1 which is a Cisco Router, in the same LAN (to remove any possibility of security checks) and filtered the event log to display only entries related to R1.
Thank you in advance.

R1.xlsx

By playing with the configuration of that node, changing the community string to a faulty string, there's a notification saying that communication with snmp agent is lost.
But once i put the correct community string, and force polling, it says in the log :

[17.08.2016 15:43:15] **** Poll request sent to server ****
[17.08.2016 15:43:15] Poll request accepted
[17.08.2016 15:43:15] Starting configuration poll for node R1
[17.08.2016 15:43:15] Capability reset
[17.08.2016 15:43:15] Checking node's capabilities...
[17.08.2016 15:43:15]    Checking SNMP...
[17.08.2016 15:43:15]    Connectivity with SNMP agent restored
[17.08.2016 15:43:15]    SNMP agent is active (version 2c)
[17.08.2016 15:43:17] Capability check finished
[17.08.2016 15:43:17] Checking interface configuration...
[17.08.2016 15:43:17] Unable to get interface list from node
[17.08.2016 15:43:17]    Interface "unknown" is no longer exist
[17.08.2016 15:43:17] Interface configuration check finished
[17.08.2016 15:43:17] Checking node name
[17.08.2016 15:43:17] Node name is OK
[17.08.2016 15:43:17] Finished configuration poll for node R1
[17.08.2016 15:43:17] Node configuration was changed after poll
[17.08.2016 15:43:17] **** Poll completed successfully ****

Which means that the snmp communication between the node and server is ok.
But, i still do not find the interfaces of my router, discovered.

Hello,
SNMP monitoring is enabled in Cisco Switch C3750. And Data collection objects are collected correctly (sysName, sysUpTime,..) but interface list is not.
And everytime i try full poll configuration, i get Unable to get interface list from node.
Besides, information in Object Details is missing, like System Description
I don't know what i can make to make it happen correctly espesially that i searched in the forum and didn't find any clue.

Thanks in advance.
Regards.

Hello Sir,
I believe that setting community string to default "public" resolved my issue in my MSL. But i wonder what was the problem with it..?

here is the full configuration poll :

[16.08.2016 15:33:40] **** Poll request sent to server ****
[16.08.2016 15:33:40] Poll request accepted
[16.08.2016 15:33:40] Starting configuration poll for node ROBOT-SAUVEGARDE
[16.08.2016 15:33:40] Capability reset
[16.08.2016 15:33:40] Checking node's capabilities...
[16.08.2016 15:33:40]    Checking SNMP...
[16.08.2016 15:33:41] Capability check finished
[16.08.2016 15:33:41] Checking interface configuration...
[16.08.2016 15:33:41] Unable to get interface list from node
[16.08.2016 15:33:41]    Interface "unknown" is no longer exist
[16.08.2016 15:33:41] Interface configuration check finished
[16.08.2016 15:33:41] Checking node name
[16.08.2016 15:33:41] Node name is OK
[16.08.2016 15:33:41] Finished configuration poll for node ROBOT-SAUVEGARDE
[16.08.2016 15:33:41] Node configuration was not changed after poll
[16.08.2016 15:33:41] **** Poll completed successfully ****

Besides, i get a different trap which is like the picture joint to this.
About your first question, no, it doesn't see the MSL as SNMP node.

here are screenshots of my configuration :

Hello, and thank you for your reply.
I am using the newest version 2.0.5 and SQL Server 2008 as Database Management Software. All this, is installed in a Windows Server 2008 R2 VM.