Did you figure this out?
M
MHammett
@MHammett
Posts
-
95 percentile -
NetXMS and Fail2BanCurrently everything points at my NetXMS server. I could, I suppose, put in a dst-nat rule above the NetXMS server that redirects all port 514 to a different box that processes it. it's probably something I'd forget while troubleshooting a broken syslog system in the future.
-
Startup ScriptLooks like I use this one:
#!/bin/sh # vim: syntax=sh ### BEGIN INIT INFO # Provides: netxms-server # Required-Start: $network $local_fs nxagentd # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: NetXMS server # Description: Network monitoring daemon, which collect and process metrics # from native and SNMP agents. ### END INIT INFO # Author: Alex Kirhenshtein <[email protected]> PATH=/sbin:/usr/sbin:/bin:/usr/bin DESC="NetXMS server" NAME=netxmsd DAEMON=/usr/bin/netxmsd DAEMON_ARGS="-d" PIDFILE=/var/run/$NAME.pid SCRIPTNAME=/etc/init.d/$NAME # Exit if the package is not installed [ -x $DAEMON ] || exit 0 # Read configuration variable file if it is present [ -r /etc/default/$NAME ] && . /etc/default/$NAME # Load the VERBOSE setting and other rcS variables . /lib/init/vars.sh # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # # Function that starts the daemon/service # do_start() { # Return # 0 if daemon has been started # 1 if daemon was already running # 2 if daemon could not be started start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ || return 1 start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \ $DAEMON_ARGS \ || return 2 # Add code here, if necessary, that waits for the process to be ready # to handle requests from services started subsequently which depend # on this one. As a last resort, sleep for some time. } # # Function that stops the daemon/service # do_stop() { # Return # 0 if daemon has been stopped # 1 if daemon was already stopped # 2 if daemon could not be stopped # other if a failure occurred start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME RETVAL="$?" [ "$RETVAL" = 2 ] && return 2 # Wait for children to finish too if this is a daemon that forks # and if the daemon is only ever run from this initscript. # If the above conditions are not satisfied then add some other code # that waits for the process to drop all resources that could be # needed by services started subsequently. A last resort is to # sleep for some time. start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON [ "$?" = 2 ] && return 2 # Many daemons don't delete their pidfiles when they exit. rm -f $PIDFILE return "$RETVAL" } # # Function that sends a SIGHUP to the daemon/service # do_reload() { # # If the daemon can reload its configuration without # restarting (for example, when it is sent a SIGHUP), # then implement that here. # start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME return 0 } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" do_start case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" do_stop case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; status) status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? ;; #reload|force-reload) # # If do_reload() is not implemented then leave this commented out # and leave 'force-reload' as an alias for 'restart'. # #log_daemon_msg "Reloading $DESC" "$NAME" #do_reload #log_end_msg $? #;; restart|force-reload) # # If the "reload" option is implemented then remove the # 'force-reload' alias # log_daemon_msg "Restarting $DESC" "$NAME" do_stop case "$?" in 0|1) do_start case "$?" in 0) log_end_msg 0 ;; 1) log_end_msg 1 ;; # Old process is still running *) log_end_msg 1 ;; # Failed to start esac ;; *) # Failed to stop log_end_msg 1 ;; esac ;; *) echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 exit 3 ;; esac :There was also this one:
#! /bin/sh ### BEGIN INIT INFO # Provides: netxmsd # Required-Start: $remote_fs nxagentd # Required-Stop: $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: NetXMS server initscript # Description: NetXMS server startup script ### END INIT INFO # Author: Raden Solutions <[email protected]> # Do NOT "set -e" # PATH should only include /usr/* if it runs after the mountnfs.sh script PATH=/sbin:/usr/sbin:/bin:/usr/bin DESC="NetXMS Server" NAME=netxmsd DAEMON=~BINDIR~/$NAME DAEMON_ARGS="-d" PIDFILE=/var/run/$NAME.pid SCRIPTNAME=/etc/init.d/$NAME # Exit if the package is not installed [ -x "$DAEMON" ] || exit 0 # Read configuration variable file if it is present [ -r /etc/default/$NAME ] && . /etc/default/$NAME # Load the VERBOSE setting and other rcS variables . /lib/init/vars.sh # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # # Function that starts the daemon/service # do_start() { # Return # 0 if daemon has been started # 1 if daemon was already running # 2 if daemon could not be started start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ || return 1 start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \ $DAEMON_ARGS \ || return 2 # Add code here, if necessary, that waits for the process to be ready # to handle requests from services started subsequently which depend # on this one. As a last resort, sleep for some time. } # # Function that stops the daemon/service # do_stop() { # Return # 0 if daemon has been stopped # 1 if daemon was already stopped # 2 if daemon could not be stopped # other if a failure occurred start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME RETVAL="$?" [ "$RETVAL" = 2 ] && return 2 # Wait for children to finish too if this is a daemon that forks # and if the daemon is only ever run from this initscript. # If the above conditions are not satisfied then add some other code # that waits for the process to drop all resources that could be # needed by services started subsequently. A last resort is to # sleep for some time. start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON [ "$?" = 2 ] && return 2 # Many daemons don't delete their pidfiles when they exit. rm -f $PIDFILE return "$RETVAL" } # # Function that sends a SIGHUP to the daemon/service # do_reload() { # # If the daemon can reload its configuration without # restarting (for example, when it is sent a SIGHUP), # then implement that here. # start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME return 0 } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" do_start case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" do_stop case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; #reload|force-reload) # # If do_reload() is not implemented then leave this commented out # and leave 'force-reload' as an alias for 'restart'. # #log_daemon_msg "Reloading $DESC" "$NAME" #do_reload #log_end_msg $? #;; restart|force-reload) # # If the "reload" option is implemented then remove the # 'force-reload' alias # log_daemon_msg "Restarting $DESC" "$NAME" do_stop case "$?" in 0|1) do_start case "$?" in 0) log_end_msg 0 ;; 1) log_end_msg 1 ;; # Old process is still running *) log_end_msg 1 ;; # Failed to start esac ;; *) # Failed to stop log_end_msg 1 ;; esac ;; status) status_of_proc $DAEMON $NAME && exit 0 || exit $? ;; *) #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload|status}" >&2 echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload|status}" >&2 exit 3 ;; esac :The second one was modified around the time I was trying to fix it.
However now it's starting fine on reboot. *sigh*
-
NetXMS and Fail2BanI'm trying to find a way to use Fail2Ban in conjunction with my centralized syslogging that NetXMS already does. However, I don't see a way to point Fail2Ban at NetXMS's database and I don't see a way to get NetXMS to save syslog to save to a file so that I can use standard Fail2Ban methods.
-
Startup ScriptI've also tried via systemctl.
root@netXMS:/etc/init.d# systemctl start netxmsd root@netXMS:/etc/init.d# systemctl status netxmsd â netxmsd.service - LSB: NetXMS server Loaded: loaded (/etc/init.d/netxmsd) Active: active (exited) since Fri 2016-11-11 08:07:06 CST; 4min 58s ago Nov 11 08:07:06 netXMS systemd[1]: Started LSB: NetXMS server initscript. Nov 11 08:08:47 netXMS systemd[1]: Started LSB: NetXMS server initscript. Nov 11 08:08:59 netXMS systemd[1]: Started LSB: NetXMS server. Nov 11 08:12:02 netXMS systemd[1]: Started LSB: NetXMS server. root@netXMS:/etc/init.d# ps aux | grep net root 28 0.0 0.0 0 0 ? S< Oct16 0:00 [netns] root 19584 0.0 0.0 5844 712 pts/0 S+ 08:07 0:00 tail -f -n 50 /var/log/netxmsd.log root 19616 0.0 0.0 12732 2304 pts/2 S+ 08:12 0:00 grep net -
Startup ScriptI have discovered that my startup script on Debian 8.6 isn't working. It works fine when I run netxmsd directly, but not when I run it via /etc/init.d/netxmsd start. There are no log entries made that way.
Can I get someone's verified working script so that I can get mine running again?
-
android agentAnything else you need to do?
Created user, put in Admins group, gave login as mobile device, added password, added mobile device object, entered the Device ID as I see it in the app, added the user there, gave it all rights.
I don't see where the device ID went so I can't verify I entered it correctly.
Error:
199 13.09.2015 16:30:35 SECURITY [redacted] 128 [redacted] Mobile device login as user "[redacted]" failed with error code 2 (client info: n/a)
It didn't like the password. I entered the LastPass generated password (copy + paste) and it didn't like it. I changed it to a simple password and it took that.
-
NetXMS video tutorial seriesTomas, I would like a video tutorial on how to be awesome like you. You've done so much with this, it's a beacon for netXMS. If it weren't for Tomas's help and videos... I would have looked at it, maybe installed it and moved on due to difficulty in figuring out how to use it. I know all of the great things Tomas has done with NetXMS, so I plow ahead know he'll light my path.