NetXMS Forum

terry

Thanks so much.

It was good for me.

Best Regards,

Terry

terry

Hello,

I have a question how can I calculate DCI with Multiple OIDs.

ifInOctets --> .1.3.6.1.2.1.2.2.1.10
ifSpeed --> .1.3.6.1.2.1.2.2.1.5

I wnat to calculate the belows;

((ifInOctets) * 8 / ifSpeed) * 100

Could you le me know how can I make the script code?

Best Regards,
-Terry

terry

Thank you very much.

I comment out those related lines.
So, I can bind.

Now, I want to know the schedule to fix the bug.

Best Regards,

Terry

terry

Hello,

I have a question about binding error.

When I binding a new MIB file, I met the bellow error.

..\var\mibs\WS-CC-RF-MIB.txt: ERROR 003: Parser error - syntax error, unexpected
COMMA_SYM, expecting RIGHT_BRACE_SYM in line 1245

The line 1245 of mib file is as the belows;
-- 1.3.6.1.4.1.388.14.3.2.1.11.5.1.12
wsCcRfRadioBasicRates OBJECT-TYPE
SYNTAX TransmitRate
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"List of basic rates for the radio."
DEFVAL { {rate1Mb}, {rate2Mb}, {rate5pt5Mb}, {rate11Mb} } <== Here is the line 1245
::= { wsCcRfRadioEntry 12 }

And, TransmotRate is defined as the belows;

TransmitRate ::= BITS
{
rate1Mb(0),
rate2Mb(1),
rate5pt5Mb(2),
rate6Mb(3),
rate9Mb(4),
rate11Mb(5),
rate12Mb(6),
rate18Mb(7),
rate22Mb(,
rate24Mb(9),
rate36Mb(10),
rate48Mb(11),
rate54Mb(12)
}

In the RFC1902, the value of the DEFVAL clause can define as the belows;

ObjectSyntax DEFVAL clause
---------------- ------------
Integer32 DEFVAL { 1 }
-- same for Gauge32, TimeTicks, Unsigned32
INTEGER DEFVAL { valid } -- enumerated value
OCTET STRING DEFVAL { 'ffffffffffff'H }
OBJECT IDENTIFIER DEFVAL { sysDescr }
BITS DEFVAL { { primary, secondary } } <=== Here
-- enumerated values that are set
IpAddress DEFVAL { 'c0210415'H } -- 192.33.4.21

I want to know what's wrong?

Please help me as soon as possible.
I attach the mib file.

Best Regards,

Terry

WS-CC-RF-MIB.txt

terry

Thanks to your help!

Here is some lines of the MIB file.

SYMBOL-WS5000-MIB DEFINITIONS ::= BEGIN

IMPORTS
DisplayString
FROM RFC1213-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
enterprises, TimeTicks, IpAddress, Integer32, Unsigned32,
Gauge32, Counter32, Counter64, BITS, OBJECT-TYPE,
MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC;
.....

If I delete BITS character form the MIB file which is define IMPORT module,
then the compilation is well done.

Best Regards,
-Terry

terry

Hi,

When I met the error while import a MIB file of Symbol WS-5000 Device.
The error message is as the belows;

"SYMBOL-WS5000-MIB: ERROR 001: Import symbol "BITS" unresolved"

Could you le me know how can I import the MIB file.

Best Regards,
-Terry

terry

Hello,

Now, I want to monitor TCP perfromance of my Cisco catalyst 2950 Switching Hub by using the MIB.
The MIB is available at :

ftp://ftp.cisco.com/pub/mibs/v2/CISCO-TCP-MIB.my

Specially, I want to monitor TCP input Packet and TCP output Packet of all ports individually.
So, I want to set the threshold of all ports and to get the alert event if any port is over the threshold.
And, I want to view the performance graphc of all oprts indivisually.

How can I do it?

Any help on this subject will be greately appreciated.

Best Regards,
-Terry

terry

Hi,

Thanks for your help.

I change ActiveDiscoveryInterval and DiscoveryPollingInterval.
And, the speed of auto-discovery is rapidly.

Again, great thanks.

Best Regards,
-Terrry

terry

Hi,

The auto-Network discovery was done.
But there is a problem.

NetXMS found a subent takes too long.
It takes over 3 hours.
Is it normal?

If anyone have a comment, please let me know.

Best Regards,

Terry

terry

Hi,

I have a question about network discovery with NetXMS(version 0.2.15) automatically.
As the result, there is no action after the setting of network discovery.
Here are my steps;

On NetXMS Console, I select the "Network Discovery" menu as the belows.

click Control Panel on the View menu
click Network Discovery on the Contorl Panenl Menu

Then "Network Discovery Configuration" window is pop-up.
And, I set items as the belows.
1. On General tab
   1) Network discovery mode --> Actvie and Passive
   2) Discovery filter --> no filtering
   3) default SNMP community --> public
2. On Active Discovery Target
   1) add a subnet

And, I check the server configuration as the belows.
1. click Control Panel on the View menu
2. click Server configuration on the Contorl Panenl Menu
And, I check some parameters
1) DefaultCommunityString --> public
2) DiscoveryFilter --> none
3) DiscoveryFilterFlags --> 7
4) NumberOfDiscoveryPollers --> 1
5) RunNetworkDiscovery --> 1

After the setting, I have no result. So, I restart server serivice and re-login NetXMS console.
But, I have same result.

Please let me know how can I use "network Didcovery" funtion.
I want to discover all nodes of serveral subnets automatically.

Best Regards,
-Terry

terry

Hi,

I found what's problem.

In nxlexer, there is not including XPM.cXX file and XPM.h.
After I add XPM.cXX and XPM.h file to nxlexer folder, the comile is success.

I think nxlexer.dsp file must changed manually by each developer because scintilla directory is different.

Best Regards,
-Terry

terry

Hi,

When I comile the NetXMS source, I met the below error.
I had scilexer.lib and scilexerd.lib form scite 172 version.

I think I've not a correct version of scintilla to compile the NetXMS source.
Please let me know what's wrong.

****************************************************************
--------------------Configuration: nxlexer - Win32 Release--------------------
Linking...
LINK : warning LNK4075: ignoring /EDITANDCONTINUE due to /INCREMENTAL:NO specification
Creating library Release/nxlexer.lib and object Release/nxlexer.exp
LINK : warning LNK4098: defaultlib "MSVCRTD" conflicts with use of other libs; use /NODEFAULTLIB:library
scilexerd.lib(PlatWin.obj) : error LNK2001: unresolved external symbol "public: __thiscall XPMSet::XPMSet(void)" (??0XPMSet@@QAE@XZ)
scilexerd.lib(PlatWin.obj) : error LNK2001: unresolved external symbol "public: __thiscall XPMSet::~XPMSet(void)" (??1XPMSet@@QAE@XZ)
scilexerd.lib(PlatWin.obj) : error LNK2001: unresolved external symbol "public: int __thiscall XPMSet::GetWidth(void)" (?GetWidth@XPMSet@@QAEHXZ)
scilexerd.lib(PlatWin.obj) : error LNK2001: unresolved external symbol "public: void __thiscall XPMSet::Add(int,char const *)" (?Add@XPMSet@@QAEXHPBD@Z)
scilexerd.lib(PlatWin.obj) : error LNK2001: unresolved external symbol "public: void __thiscall XPMSet::Clear(void)" (?Clear@XPMSet@@QAEXXZ)
scilexerd.lib(PlatWin.obj) : error LNK2001: unresolved external symbol "public: void __thiscall XPM::Draw(class Surface *,class PRectangle &)" (?Draw@XPM@@QAEXPAVSurface@@AAVPRectangle@@@Z)
scilexerd.lib(PlatWin.obj) : error LNK2001: unresolved external symbol "public: class XPM * __thiscall XPMSet::Get(int)" (?Get@XPMSet@@QAEPAVXPM@@H@Z)
scilexerd.lib(PlatWin.obj) : error LNK2001: unresolved external symbol "public: int __thiscall XPMSet::GetHeight(void)" (?GetHeight@XPMSet@@QAEHXZ)
Release/nxlexer.dll : fatal error LNK1120: 8 unresolved externals
Error executing link.exe.

nxlexer.dll - 9 error(s), 2 warning(s)
*****************************************************************

Best Regards,

Terry

terry

I found new environments.

Must install bison and FLEX for windows.

To get the setup file of bison, visit http://gnuwin32.sourceforge.net/packages/bison.htm
To get the setup file of FLEX, visit http://gnuwin32.sourceforge.net/packages/flex.htm

After the installation, must set the environment in Visual studio.

* navigate the menu : Tools --> Options --> Directory
1) select "Excutable files" in "Show Directory for" item.
2) add the path for bison and FLEX

* navigate the menu : Tools --> Options --> Directory
1) select "include files" in "Show Directory for" item.
2) add the path for "bison's include directory"

Best Regards,
-Terry

terry

HI,

When I compiled the source, I met the error as the belows;
So, I search the directory. There is not nxsl.cpp.
netxms-0.2.14 source files is same.

Please let me know, how can I get nxsl.cpp file.

--------------------Configuration: nxlexer - Win32 Debug--------------------
Build : warning : failed to (or don't know how to) build 'D:netxms-0.2.14\src\console\nxlexer\nxsl.cpp'
Compiling...
nxsl.cpp
fatal error C1083: Cannot open source file: 'D:\netxms-0.2.14\src\console\nxlexer\nxsl.cpp': No such file or directory
Error executing cl.exe.

nxlexer.dll - 1 error(s), 1 warning(s)

Regards,

Terry

terry

I serached NetXMS site to know the compile enviroment for Windows platform.
But, I can't find it.

I knew there are to need other resources to compile.
But, I don't know excactly.

Anyone knows the compile environment for windows platform,
please let us know.

Regards,
-Terry

terry

I serached NetXMS site to know the compile enviroment for Windows platform.
But, I can't find it.

I knew there are to need other resources to compile.
But, I don't know excactly.

Anyone knows the compile environment for windows platform,
please let us know.

Regards,
-Terry

NetXMS Forum

terry

Posts