NetXMS Forum

Same problem here, 2003 R2. Hangs finishing installation in step "Checking core service configuration..."

Hi,

you  must go to your device, go to "Last Values" tab, and do right click on desired value, select graph type. Once you have the desired graph ( cpu value, kbits, mem etc) you will see a Save button on this graph. Save it and you will see this graph on graphs tab.

Regards.

Hi, you can disable it on "Configuration\Event processing Policy" just look for "Generate alarm when incorrect network mask detected on interface" and disable this policy.

Regards.

@alk said in Reports... again:

I highly recommend you to use Jaspersoft Studio (http://community.jaspersoft.com/project/jaspersoft-studio) instead of iReport

Hi Victor, ill give a try, thanks!

Greetings.

@phonix786 said in Reports... again:

Is there any external tools by which we can generate reports on Windows Installation?

Hi phonix, i´m using http://community.jaspersoft.com/project/ireport-designer, with iReport you can generate a jrxml file extension, this file will be used by netxms when we succesfully install reports on netxms with windows server.

I have some reports created, like capacity of switches.

Greetings.

Great! I´ll upgrade now.
Thanks for your work.

Greetings.

Hi, you must configure it on "interface" of host. If your host have interface "Local Network", click right button on interface/properties/polling/polling count. If the polling of host it´s 1 minute and you configure 5 polling, will raise alarm at 5 minutes.

Greetings.

Hi, i think the last time i complied a MIB, i don´t specify the file, only specify directory, and re-compile all the mibs.

Greetings

Hi, check it at .1.3.6.1.4.1

[root].iso.org.dod.internet.private."your trademark mib"

Greetings.

Hi All, when i try to create a report clicking right button on reports, i can´t see the option "create report".
This is my netxmsd.conf

LogFile = C:\NetXMS\log\system.log
DBDriver = mysql.ddr
DBServer = localhost
DBName = nms_netxms_db
DBLogin = *****
DBPassword = *******
LogFailedSQLQueries = yes
JavaPath=C:\NetXMS\bin\jre
JavaLibraryDirectory=C:\NetXMS\var\reports
JDBCDriver=com.mysql.jdbc.Driver
JDBCUrl=jdbc:mysql://127.0.0.1/nms_netxms_db
jdbc.username=******
jdbc.password=******


CreateCrashDumps = yes
DumpDirectory = C:\NetXMS\log\

In path "JavaPath=C:\NetXMS\bin\jre" i´ve putted the reportgenerator.jar, but nothing. I tried with 2 versions of reportgenerator.jar
I think in the past version 1.2.7 ( i updated to 1.2.8 ) this still working.

I wanna try, because i generated some reports in jrxml
Thanks!!

Greetings

Hi Victor, i prepared a report designed in jrxml, but now when i try to create a report dont appears the "New report" button.  :-
Do you know why? 

Thanks

 ;D Wooot nice news!

Hi Victor, it´s working!

I tried your command and i added v3 :

C:\NetXMS\bin>nxsnmpwalk.exe -v3 -u riusnmp -a SHA1 -A Sardina131 192.168.7.254
.1.3.6.1.2.1.1
.1.3.6.1.2.1.1.1.0 [STRING]: Alcatel-Lucent OS10K *** Service Release, January 16, 2013.
.1.3.6.1.2.1.1.2.0 [OBJECT IDENTIFIER]: .1.3.6.1.4.1.6486.801.1.1.2.1.9.1.1
.1.3.6.1.2.1.1.3.0 [TIMETICKS]: 1027116800
.1.3.6.1.2.1.1.4.0 [STRING]: Alcatel-Lucent, http://alcatel-lucent.com/wps/portal/enterprise
.1.3.6.1.2.1.1.5.0 [STRING]: ALU
.1.3.6.1.2.1.1.6.0 [STRING]: Unknown
.1.3.6.1.2.1.1.7.0 [INTEGER]: 78

The problem as you mentioned, i have got a DES encription enabled on NetXMS!!
Now the core it´s working on NetXms , i´ll take a look .
Thanks for your work!

I don´t have encription password, it´s blank. I tried with other snmp tool and it´s working.

C:\snmpget>SnmpGet.exe -r:192.168.xxx.xxx -v:3 -t:3 -sn:"user" -ap:SHA -aw:"password" -o:1.3.6.1.2.1.1.3.0
SnmpGet v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on http://www.snmpsoft.com ]
OID=.1.3.6.1.2.1.1.3.0
Type=TimeTicks
Value=118 days, 5:55:56.00
C:\snmpget>

I´ll try with v2c .

Thanks

Hi Victor,

Thanks for fast response. I´m using SHA1 and DES .

I executed nxsnmpwalk and gets timeout.

C:\NetXMS\bin>nxsnmpwalk.exe -u private -a SHA1 -A private -e DES 192.168.my.ip .1.3.6.1.2.1.1
SNMP Error: Request timed out

I think i wrote correctly the command.

Thanks

Hi all,

I´m trying to add a core-switch : http://enterprise.alcatel-lucent.com/?product=OmniSwitch10k&page=overview
But when i add this switch, netxms can´t get interfaces, any config from it.

I´m getting this log, pooling configuration :

[17.07.2013 17:21:49] **** Poll request sent to server ****
[17.07.2013 17:21:49] Poll request accepted
[17.07.2013 17:21:49] Starting configuration poll for node CORE_ALU_10k
[17.07.2013 17:21:49]    Checking SNMP...
[17.07.2013 17:21:49] Checking node's capabilities...
[17.07.2013 17:22:37] Capability check finished
[17.07.2013 17:22:37] Checking interface configuration...
[17.07.2013 17:22:37] Unable to get interface list from node
[17.07.2013 17:22:37]    Interface "unknown" is no longer exist
[17.07.2013 17:22:37] Checking node name
[17.07.2013 17:22:37] Interface configuration check finished
[17.07.2013 17:22:37] Node name is OK
[17.07.2013 17:22:37] Finished configuration poll for node CORE_ALU_10k
[17.07.2013 17:22:37] Node configuration was not changed after poll
[17.07.2013 17:22:37] **** Poll completed successfully ****

I tried with a snmptest program, in the netxms server with the same credentials and snmp works!
Must import any mib or something similar ?

Thanks for your support.

Hi Victor,

For telnet and SSH i configured putty on the object tool like :
"putty -telnet %OBJECT_IP_ADDR%" for telnet and "putty  %OBJECT_IP_ADDR%" for ssh.
For the correct execution, the file putty.exe ( or telnet ) must be on the same directory like "nxmc.exe" .
In my case : "C:\Program Files (x86)\nxmc"

Greetings.

Hi, i´m checking our interfaces state.

When status of ifOperStatus "5" ( snmp value ) must be dormant state, i´m getting "unknow" . 
http://www.net-snmp.org/docs/mibs/interfaces.html
This interfaces in dormant status are used in link aggregated interfaces.

Thanks .

Thanks Alex!
Now i´ll try to implement your script.
Greetings

It´s possible to make the same question, with scripting ?

I´m trying to make an script, for free ports on my switches.

SELECT op.name,COUNT(i.if_type) AS FreePorts
FROM interfaces i, object_properties op
WHERE i.if_type=6
AND i.node_id=op.object_id
AND i.oper_state='2'
GROUP BY op.name

Greetings