NetXMS Forum

Thanks for the suggestion but I already did that without success. Here is debug dump:

[16-Sep-2016 14:50:53.932] [DEBUG] [session:0] Message dump:
  ** 00410000000000580000662500000001
  ** 00000055010000000000003800460069
  ** 006C0065002E0043006F0075006E0074
  ** 00280053003A005C0041007200680069
  ** 0076002D006D00650072006900740076
  ** 0065002900000000
  ** code=0x0041 (CMD_GET_PARAMETER) flags=0x0000 id=26149 size=88 numFields=1
  ** [    85] STRING   "File.Count(S:\Arhiv-meritve)"

[16-Sep-2016 14:50:53.932] [DEBUG] [session:0] Received message CMD_GET_PARAMETER
[16-Sep-2016 14:50:53.932] [DEBUG] [session:0] Requesting parameter "File.Count(S:\Arhiv-meritve)"
[16-Sep-2016 14:50:53.932] [DEBUG] H_DirInfo: path="S:\Arhiv-meritve" pattern="*" recursive=false mode=1
[16-Sep-2016 14:50:53.932] [DEBUG] [session:0] GetParameterValue(): result is 500 (INTERNAL_ERROR)
[16-Sep-2016 14:50:53.932] [DEBUG] [session:0] Sending message CMD_REQUEST_COMPLETED (size 32)
[16-Sep-2016 14:50:53.932] [DEBUG] [session:0] Outgoing message dump:
  ** 001D0000000000200000662500000001
  ** 0000001C00000000000001F400000000
  ** code=0x001D (CMD_REQUEST_COMPLETED) flags=0x0000 id=26149 size=32 numFields=1
  ** [    28] INT32    500

[16-Sep-2016 14:50:53.932] [DEBUG] [session:0] Message dump:
  ** 00410000000000580000662600000001
  ** 00000055010000000000003800460069
  ** 006C0065002E0043006F0075006E0074
  ** 00280053003A005C0041007200680069
  ** 0076002D006D00650072006900740076
  ** 0065002900000000
  ** code=0x0041 (CMD_GET_PARAMETER) flags=0x0000 id=26150 size=88 numFields=1
  ** [    85] STRING   "File.Count(S:\Arhiv-meritve)"

Hi!

Our process is generating some files every five minutes and therefore would like to check if the process is running well. I would like to count the number of files that are not older than 30 minutes. When I execute File.Count() on local folder where NetXMS is installed everything is ok and it returns the number of files in that folder. However, when I try to execute the next command  I get ERROR.

File.Count(\\nasrcv01\mape\arhivi\skupni,*,0,0,-1800)

The debug reports next:

[15-Sep-2016 23:45:36.712] [DEBUG] [session:0] Message dump:
  ** 00410000000000980000245D00000001
  ** 00000055010000000000007600460069
  ** 006C0065002E0043006F0075006E0074
  ** 0028005C005C006E0061007300720063
  ** 007600300031005C007500690062005C
  ** 006100720068006900760069005C004E
  ** 00650070006C0061006E005F0073006B
  ** 00750070006E0069002C002A002C0030
  ** 002C0030002C002D0031003800300030
  ** 0029000000000000
  ** code=0x0041 (CMD_GET_PARAMETER) flags=0x0000 id=9309 size=152 numFields=1
  ** [    85] STRING   "File.Count(\\nasrcv01\uib\arhivi\Neplan_skupni,*,0,0,-1800)"

[15-Sep-2016 23:45:36.712] [DEBUG] [session:0] Received message CMD_GET_PARAMETER
[15-Sep-2016 23:45:36.712] [DEBUG] [session:0] Requesting parameter "File.Count(\\nasrcv01\uib\arhivi\Neplan_skupni,*,0,0,-1800)"
[15-Sep-2016 23:45:36.712] [DEBUG] H_DirInfo: path="\\nasrcv01\uib\arhivi\Neplan_skupni" pattern="*" recursive=false mode=1
[15-Sep-2016 23:45:36.712] [DEBUG] [session:0] GetParameterValue(): result is 500 (INTERNAL_ERROR)
[15-Sep-2016 23:45:36.712] [DEBUG] [session:0] Sending message CMD_REQUEST_COMPLETED (size 32)
[15-Sep-2016 23:45:36.712] [DEBUG] [session:0] Outgoing message dump:
  ** 001D0008000000200000245D00000001
  ** 0000001C00000000000001F400000000
  ** code=0x001D (CMD_REQUEST_COMPLETED) flags=0x0008 id=9309 size=32 numFields=1
  ** [    28] INT32    500

What could be the reason for such an error since the debug report doesn't give me any clue what the problem is. The only thing I think of is mybe not access rights...

I'm using version 2.0.6
Thanks, zabig