Lukas, That's exactly what I was looking for.  I think I understand my issue and now to try and fix it. Mark

Can you provide some context information? What are those .bit files suppose to contain? Which OS? Lukas

http://en.wikipedia.org/wiki/Snmp NetXMS works as SNMP manager for SNMP agents installed on devices - your linux servers probably have SNMP already installed (search for net-snmp, look at /etc/snmp/snmpd.conf) Hope it helps. Lukas

When SLA monitoring will be available

Hello,   this has bothered me for a while now... Alcoma devices do not have LLDP functionality (confirmed with system developer) and does not appear on Network Maps. But in the event : "Include end nodes" turned on + one device in Alcoma pair goes offline = Alcoma shows on the map. On top of it, the device also shows information about network peers in the Interface tab, but as soon as the offline device is back online this information disappears. My questions would be how comes the network peers information is removed when the pair node goes back online is it possible somehow define devices without LLDP functionality to be acknowledged and incorporated by the Automatic Network Map process ? The information about the peer takes into account only network interface of the device so I wouldnt mind these device pairs not being connected, just showing as end nodes at the correct place would be sufficient. With regards, Milan Sperl

Hi Managed to resolve this. Running Apache webserver also, so there was a conflict with using tomcat even though it was on a different port. Altered apache.conf to listen on server ip x.x.x.x:80 instead of 0.0.0.0:80. I am now in and starting to explore NetXMS!

Hi, i have the following scenario: one netxms server monitoring many Cisco 2960. When an interface of switch goes down, i want that netxms sent a mail alarm with the interface name and the host connected to that interface. Unfortuneatly, my netxms can't get the list of peer connected to the switch (https://www.netxms.org/forum/general-support/can't-get-switch-forwarding-database-on-cisco-2960/msg10277/#msg10277). There are news about this problems? If no, i realize a filtering script that get interface description from the switch through SNMP and add it to the message mail . Thank You

Hi, I have a SNMP based sensor device which send traps to SNMP server. I have created a node object named as 'AKSPSersorProbe' and have put its MIB file in the location \NetXMS\var\mibs. The MIB file is already compiled and I can open it from NetXMS MIB explorer. The device sends a SNMP trap with 6 varbinds when any critical vibration is detected. I have created an event with those 6 varbinds and i have created a rule to display this alarm. It was tested working fine. My question is when I receive this trap it shows the OID in raw format (I want it to be translated from the MIB file automatically by the server). for example if it shows .1.3.6.1.4.1.3854.1.0.301 then actually I should get it like SPAGENT-MIB::spSwitch1Status (where 'SPAGENT-MIB' is the module name and 'spSwitch1Status' is the enterprise specific trap name). Another thing which I noticed is that the varbind integer value is getting parsed from the mib file. In this case the 1st variable is .1.3.6.1.4.1.3854.1.7.1.0 == '4' whose value is '4'. Instead of showing this integer value I should get as its textual convention which is already defined in the MIB file as 'HighCritical'. Please help me to configure this. I have attached the SNMP trap log and the MIB file for your reference. Thanks and best Regards,   sp.mib NetXMS_Trap.txt

Hi, Thanks for your help. I have created an own event for this error condition and I configured properly. Then the alarm event generation is works fine. Best regards, Zsolt

  Ok its working after stopping status polling. Thanx

I understand that fact and I have already configured it like what you suggested. But my problem is I cannot get the text value which is actually associated with a particular variable in my MIB file. For example when SNMP trap is coming from my device in NetXMS I cant get the value of the variable (say 'status') of that particular trap as '4' . In the MIB file this status object is defined as if value is '4' then it should send value as 'highcritical' that is what I am not able to get. Can you help to to get that and also how can I associate an object defined in my MIB file with a newly created node. Thanks in advance.

Hi, Thank you, it worked fine Nikk

Hi! That's good to hear that problem source is found - problem seemed very weird. Best regards, Victor

Thanks! It would be much appreciated! mitch

You can set config variable LogAllSNMPTraps to 1 - then server will log traps from unknown devices, but you cannot get automated alarm from that log. There are also feature request for device discovery based on SNMP traps: https://www.radensolutions.com/chiliproject/issues/307. We plan to implement it in one of next versions. Best regards, Victor

Hello. Yes, it's possible. Check https://www.netxms.org/documentation/adminguide/data-collection.html#macros-in-template-items for more details.

I'm probably just being silly but how do I ignore an entire subnet in netxms. One of the objects my installation is monitoring is my Home Firewall/Router, and therefore it keeps alarming when devices dissapear off my home network which happens quite a lot with devices like smartphones going in and out of sleep. I want it to monitor the Router itself but I don't care about the devices behind it. I have passive/active scanning set but my home subnet is not in the list of subnets to scan.

Can you be more specific please? What exact problem you have with loading MIBs? Best regards, Victor

i replace code and everything is the same here stack trace Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0xb70ffb70 (LWP 10813)] 0xb7a15d03 in strlen () from /lib/libc.so.6 (gdb) bt #0  0xb7a15d03 in strlen () from /lib/libc.so.6 #1  0xb7f1dec1 in DCTable::processNewValue (this=0x81273a0, nTimeStamp=1381732962, value=0xb480c4f8) at dctable.cpp:389 #2  0xb7f21120 in DataCollectionTarget::processNewDCValue (this=0x8128850, dco=0x81273a0, currTime=1381732962, value=0xb480c4f8) at dctarget.cpp:366 #3  0xb7f0d1af in DataCollector (pArg=0x0) at datacoll.cpp:254 #4  0xb7c38830 in start_thread () from /lib/libpthread.so.0 #5  0xb7a7c15e in clone () from /lib/libc.so.6

mysql> SELECT * FROM idata_134 WHERE item_id=26; +---------+-----------------+-------------+ | item_id | idata_timestamp | idata_value | +---------+-----------------+-------------+ | 26 | 1381494998 | 22 | | 26 | 1381495238 | 22 | | 26 | 1381495478 | 22 | | 26 | 1381495718 | 22 | | 26 | 1381495958 | 22 | | 26 | 1381496198 | 22 | | 26 | 1381496438 | 22 | | 26 | 1381496678 | 22 | | 26 | 1381496918 | 22 | | 26 | 1381497158 | 22 | | 26 | 1381497398 | 22 | | 26 | 1381497638 | 22 | | 26 | 1381497878 | 22 | | 26 | 1381498118 | 22 | +---------+-----------------+-------------+ 14 rows in set (0.00 sec) mysql> SELECT avg(coalesce(idata_value,0)) FROM idata_134 WHERE item_id=26 and idata_timestamp between 1381494998 and 1381497638; +------------------------------+ | avg(coalesce(idata_value,0)) | +------------------------------+ | 22 | +------------------------------+ 1 row in set (0.00 sec) Script: startTime = 1381494998; stopTime = 1381497638; object = FindNodeObject(null,"TERM1"); trace(0, "*** VALUE: " . GetAvgDCIValue(object, FindDCIByDescription(object,"npThermoValue"), startTime, stopTime)); trace(0, "*** MAX: " . GetMaxDCIValue(object, FindDCIByDescription(object,"npThermoValue"), startTime, stopTime)); trace(0, "*** MIN: " . GetMinDCIValue(object, FindDCIByDescription(object,"npThermoValue"), startTime, stopTime)); Result: [11-Oct-2013 17:34:24.413] [INFO ] *** VALUE: 2.000000 [11-Oct-2013 17:34:24.414] [INFO ] *** MAX: 22.000000 [11-Oct-2013 17:34:24.414] [INFO ] *** MIN: 22.000000