Different switch port layouts on "Ports" tab
-
We have implemented option to have different switch port layouts on "Ports" tab (non default like down-to-up, right-to-left). For now we have changed port layout only for HP A-series (former H3C) as we have one. If you know other SNMP devices that have non standard port layout configuration please share. Will be happy to set correct configuration for them.
-
-
-
@zev said in Different switch port layouts on "Ports" tab:
We have implemented option to have different switch port layouts on "Ports" tab (non default like down-to-up, right-to-left). For now we have changed port layout only for HP A-series (former H3C) as we have one. If you know other SNMP devices that have non standard port layout configuration please share. Will be happy to set correct configuration for them.
D-Link DES3200-28C1, DGS-3120S\C, DES-3528, DGS-3000-10 and other.
Juniper MX series.
-
When reporting devices, please specify it's SNMP OID and actual port layout - that will save us lot of time looking for that information.
-
@victor said in Different switch port layouts on "Ports" tab:
When reporting devices, please specify it's SNMP OID and actual port layout - that will save us lot of time looking for that information.
Please Provide an example of how it should look like and how do we show it here.
-
Switch OID - value of .1.3.6.1.2.1.1.2.0. For example, on my H3C switch:
victor@hp8570w ~ $ /opt/netxms/bin/nxsnmpget 10.5.4.1 .1.3.6.1.2.1.1.2.0
.1.3.6.1.2.1.1.2.0 [OBJECT IDENTIFIER]: .1.3.6.1.4.1.43.1.16.4.3.83Port layout - just specify how many rows and how numbering goes. Same H3C example:
2 rows, numbering down-up then left-right:
2 4 6 8 ...
1 3 5 7 ...Best regards,
Victor -
@victor said in Different switch port layouts on "Ports" tab:
Switch OID - value of .1.3.6.1.2.1.1.2.0. For example, on my H3C switch:
victor@hp8570w ~ $ /opt/netxms/bin/nxsnmpget 10.5.4.1 .1.3.6.1.2.1.1.2.0
.1.3.6.1.2.1.1.2.0 [OBJECT IDENTIFIER]: .1.3.6.1.4.1.43.1.16.4.3.83Port layout - just specify how many rows and how numbering goes. Same H3C example:
2 rows, numbering down-up then left-right:
2 4 6 8 ...
1 3 5 7 ...Best regards,
VictorSystem Description=DES-3200-28/C1 Fast Ethernet Switch
SNMP Object ID=.1.3.6.1.4.1.171.10.113.5.1
-
-
CISCO SG200-26:
OID: .1.3.6.1.4.1.9.6.1.88.26.1
1 2 3 4 5 6 7 8 9 10 11 12 25C 25F
13 14 15 16 17 18 19 20 21 22 23 24 26C 26FCISCO SG250-26:
OID: .1.3.6.1.4.1.9.6.1.97.26.1
1 2 3 4 5 6 7 8 9 10 11 12 25C 25F
13 14 15 16 17 18 19 20 21 22 23 24 26C 26FZyXEL GS2210-8
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8 10C 10F
1 3 5 7 9C 9FZyXEL GS1900-8
OID: .1.3.6.1.4.1.890.1.15
1 2 3 4 5 6 7 8ZyXEL GS1900-24E
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8 10 12 14 16 18 20 22 24
1 3 5 7 9 11 13 15 17 19 21 23ZyXEL GS1920-24
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8 10 12 14 16 18 20 22 24 26C 28C 26F 28F
1 3 5 7 9 11 13 15 17 19 21 23 25C 27C 25F 27F(Combo Ports are marked as 'C' for Copper and 'F' for Fiber)
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login