Strange interface counting and port view
-
Hello,
I have some modulare HP 5412 switches. The component view looks pretty good. Several modules as container and ports from Letter 1-24 (A1-A24, B1-B24,...).
The interface names in interface view are also right, even the ifIndex is incrementing correctly (A1=1, A24=24, B1=25, B24=48), BUT the port number is wrong.A1=1, A23=23, A24=0, B1=1, B23=23, B24=0
This leads to display errors in port view. Sometime even one port (24) is missing per module and most modules start with port 0 instead of 1.
For further info watch the screenshots.
-
Hi,
what is device OID and what driver is selected? If it is PROCURVE, please check if node has custom attributes .procurve.isModular and .procurve.slotSize.
Best regards,
Victor -
Update: I likely found the reason for this error in numbering. Next release should show it correctly.
Best regards,
Victor
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login