Agent configuration file problem in NetXMS version 2.6.300
-
It's ok with /etc/netxmsd.conf - it's just printing what config file it's using. The error is "FATAL ERROR: Cannot open log file".
I can think of two reasons for that:
- you are starting it as regular user, but the log file was previously opened by netxms running under root (because systemd lauches it this way). So under regular user you don't have rights to write to same log file. Try running under root user.
- check log file configuration in /etc/netxmsd.conf. Does it point to non-existing folder?
-
Hi, Filipp. I ran the netXMS server under root user:
root@hpserver1:~# systemctl start netxmsd
root@hpserver1:~# systemctl status netxmsd
● netxmsd.service - NetXMS Server
Loaded: loaded (/lib/systemd/system/netxmsd.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Fri 2020-12-04 23:12:57 UTC; 7s ago
Process: 9502 ExecStart=/usr/bin/netxmsd -d (code=exited, status=0/SUCCESS)
Main PID: 9510 (code=exited, status=3)Dec 04 23:12:57 hpserver1 systemd[1]: Starting NetXMS Server...
Dec 04 23:12:57 hpserver1 systemd[1]: Started NetXMS Server.
Dec 04 23:12:57 hpserver1 systemd[1]: netxmsd.service: Main process exited, code=exited, status=3/NOTIMPLEMENT
Dec 04 23:12:57 hpserver1 systemd[1]: netxmsd.service: Failed with result 'exit-code'.The first lines of the netxmsd.conf file
## Logging
# Log file name
LogFile=/var/log/netxmsd# Increase logging verbosity, 0 (only errors) to 9 (verbose debug)
#DebugLevel=3## Database configuration.
## Uncomment and setup ONE section.## Option #1 - SQLite (for test installations only):
#DBDriver=sqlite.ddr
#DBName=/var/lib/netxms/netxms.dbNothing to point to the non-existing folder.
-
try deleting /var/log/netxmsd and running
netxmsd -D 6
again.
Wil the error be the same? -
-
You are running netxmsd as user "josemb" which does not have write access to /var/log.
Either run netxmsd as root, or change configuration file location.@jbriseno said in Agent configuration file problem in NetXMS version 2.6.300:
Hi, Filipp
I deleted the /var/log/netxmsd file
josemb@hpserver1:~$ netxmsd -D 6
Using configuration file "/etc/netxmsd.conf"
FATAL ERROR: Cannot open log file -
Hi, Alex I appreciate your time to help me. I repeated the Filipp procedure as root user. The computer screen sent the following messages:
root@hpserver1:/var/log# rm netxmsd.log
root@hpserver1:/var/log# cd
root@hpserver1:~# netxmsd -D 6
Using configuration file "/etc/netxmsd.conf"
2020.12.05 12:56:36.873 *D* [ ] LIB directory set to /usr/local/lib/netxms
2020.12.05 12:56:36.874 *I* [ ] Code page set to ISO8859-1
2020.12.05 12:56:36.874 *E* [ ] Cannot load platform subagent "/usr/local/lib/netxms/linux.nsm" (/usr/local/lib/netxms/linux.nsm: cannot open shared object file: No such file or directory)
2020.12.05 12:56:36.874 *E* [db.drv ] Unable to load database driver module "mysql.ddr": /usr/local/lib/netxms/dbdrv/mysql.ddr: cannot open shared object file: No such file or directoryThe content of the netxmsd.conf file
# Logging
# Log file name
LogFile=/var/log/netxmsd# Increase logging verbosity, 0 (only errors) to 9 (verbose debug)
#DebugLevel=3## Database configuration.
## Uncomment and setup ONE section.## Option #1 - SQLite (for test installations only):
#DBDriver=sqlite.ddr
#DBName=/var/lib/netxms/netxms.db## Option #2 - PostgreSQL (recommended):
#DBDriver=pgsql.ddr
#DBServer=127.0.0.1
#DBName=netxms
#DBLogin=netxms
#DBPassword=netxms##Option #3 - MySQL:
DBDriver=mysql.ddr
DBServer=localhost
DBName=netxms
DBLogin=############
DBPassword=########## Option #4 - Oracle:
#DBDriver=oracle.ddr
#DBServer=//127.0.0.1:1521/ORCL # Instant Client connection string or SID
#DBLogin=netxms
#DBPassword=netxms## Option #5 - unixODBC/FreeTDS:
#DBDriver=odbc.ddr
#DBServer=NETXMS_DSN
#DBLogin=netxms
#DBPassword=netxmsThanks in Advance
-
According to systemctl output, netxms is installed in /usr, but it tries to load modules from /usr/local/bin - this looks like you mixed binaries from different versions.
I recommend to clean both versions, then configure and make install again.Which distro do you use?
-
-
I would do the following way:
apt remove "netxms*"Then find and delete the following files on the file system:
libnx*
libnetxms*And then install netxms again - install netxms-release package and then netxms-server, netxms-agent and database driver package.
-
-
The database will stand as it is, so there is no need to do init or upgrade. Netxms will just connect to the database that it has in config file.
-
-
Hi, Fillip. I followed your directions to re install the NextXMS on our server. However, when I tried to install it appeared an error:
Error while loading shared libraries: libnxdb.so.36 when I tried to install the latest netXMS server
Apt command information
sudo apt-get install netxms-server netxms-dbdrv-mysql
The following additional packages will be installed:
netxms-agent netxms-dbdrv-sqlite3
The following NEW packages will be installed:
netxms-agent netxms-dbdrv-mysql netxms-dbdrv-sqlite3 netxms-serversudo systemctl status nxagentd.service
%u25CF nxagentd.service - NetXMS Agent
Loaded: loaded (/lib/systemd/system/nxagentd.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Tue 2020-12-08 16:15:14 UTC; 4min 59s agoDec 08 16:15:14 hpserver1 systemd[1]: Starting NetXMS Agent...
Dec 08 16:15:14 hpserver1 nxagentd[15444]: /usr/bin/nxagentd: error while loading shared libraries: libnxdb.so.36: cannot open s
Dec 08 16:15:14 hpserver1 systemd[1]: nxagentd.service: Control process exited, code=exited status=127
Dec 08 16:15:14 hpserver1 systemd[1]: nxagentd.service: Failed with result 'exit-code'.
Dec 08 16:15:14 hpserver1 systemd[1]: Failed to start NetXMS Agent.josemb@hpserver1:~$ sudo find / -name libnx*
[sudo] password for josemb:
/usr/lib/x86_64-linux-gnu/libnxlp.so.36.0.0
/usr/lib/x86_64-linux-gnu/libnxlp.so.36
/usr/lib/x86_64-linux-gnu/libnxsl.so.36.0.0
/usr/lib/x86_64-linux-gnu/libnxagent.so.36.0.0
/usr/lib/x86_64-linux-gnu/libnxcore.so.36
/usr/lib/x86_64-linux-gnu/libnxcore.so.36.0.0
/usr/lib/x86_64-linux-gnu/libnxsrv.so.36.0.0
/usr/lib/x86_64-linux-gnu/libnxsrv.so.36
/usr/lib/x86_64-linux-gnu/libnxsl.so.36
/usr/lib/x86_64-linux-gnu/libnxdbmgr.so.36
/usr/lib/x86_64-linux-gnu/libnxagent.so.36
/usr/lib/x86_64-linux-gnu/libnxdbmgr.so.36.0.0Do you know what I did wrong? any comments are wellcome !
-
Did you manage to find and delete libnx* and libnetxms* files?
Please show the output of these two commands:
ldd /usr/bin/nxagentd ldd /usr/lib/x86_64-linux-gnu/libnxdb.so.36 -
Hi, Filipp. Yes I did them.
The output of mentioned two commands:
ldd /usr/bin/nxagentd
linux-vdso.so.1 (0x00007ffc9abed000)
libappagent.so.36 => /usr/lib/x86_64-linux-gnu/libappagent.so.36 (0x00007f129e708000)
libnxagent.so.36 => /usr/lib/x86_64-linux-gnu/libnxagent.so.36 (0x00007f129e4f7000)
libnxdb.so.36 => not found
libnetxms.so.36 => not found
libnxsnmp.so.36 => not found
libsystemd.so.0 => /lib/x86_64-linux-gnu/libsystemd.so.0 (0x00007f129e273000)
libjansson.so.4 => /usr/lib/x86_64-linux-gnu/libjansson.so.4 (0x00007f129e065000)
librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f129de5d000)
libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f129dc59000)
libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f129da3a000)
libssl.so.1.1 => /usr/lib/x86_64-linux-gnu/libssl.so.1.1 (0x00007f129d7ac000)
libcrypto.so.1.1 => /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 (0x00007f129d2de000)
libcurl.so.4 => /usr/lib/x86_64-linux-gnu/libcurl.so.4 (0x00007f129d05f000)
libpcre32.so.3 => /usr/lib/x86_64-linux-gnu/libpcre32.so.3 (0x00007f129cdfc000)
libstdc++.so.6 => /usr/lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007f129ca73000)
libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007f129c85b000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f129c46a000)
libnetxms.so.36 => not found
libnxdb.so.36 => not found
libnetxms.so.36 => not found
liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007f129c244000)
liblz4.so.1 => /usr/lib/x86_64-linux-gnu/liblz4.so.1 (0x00007f129c028000)
libgcrypt.so.20 => /lib/x86_64-linux-gnu/libgcrypt.so.20 (0x00007f129bd0c000)
/lib64/ld-linux-x86-64.so.2 (0x00007f129eeac000)
libnghttp2.so.14 => /usr/lib/x86_64-linux-gnu/libnghttp2.so.14 (0x00007f129bae7000)
libidn2.so.0 => /usr/lib/x86_64-linux-gnu/libidn2.so.0 (0x00007f129b8c8000)
librtmp.so.1 => /usr/lib/x86_64-linux-gnu/librtmp.so.1 (0x00007f129b6ac000)
libpsl.so.5 => /usr/lib/x86_64-linux-gnu/libpsl.so.5 (0x00007f129b49e000)
libgssapi_krb5.so.2 => /usr/lib/x86_64-linux-gnu/libgssapi_krb5.so.2 (0x00007f129b253000)
libldap_r-2.4.so.2 => /usr/lib/x86_64-linux-gnu/libldap_r-2.4.so.2 (0x00007f129b001000)
liblber-2.4.so.2 => /usr/lib/x86_64-linux-gnu/liblber-2.4.so.2 (0x00007f129adf3000)
libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f129abd6000)
libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f129a838000)
libgpg-error.so.0 => /lib/x86_64-linux-gnu/libgpg-error.so.0 (0x00007f129a623000)
libunistring.so.2 => /usr/lib/x86_64-linux-gnu/libunistring.so.2 (0x00007f129a2a5000)
libgnutls.so.30 => /usr/lib/x86_64-linux-gnu/libgnutls.so.30 (0x00007f1299f3f000)
libhogweed.so.4 => /usr/lib/x86_64-linux-gnu/libhogweed.so.4 (0x00007f1299d0b000)
libnettle.so.6 => /usr/lib/x86_64-linux-gnu/libnettle.so.6 (0x00007f1299ad5000)
libgmp.so.10 => /usr/lib/x86_64-linux-gnu/libgmp.so.10 (0x00007f1299854000)
libkrb5.so.3 => /usr/lib/x86_64-linux-gnu/libkrb5.so.3 (0x00007f129957e000)
libk5crypto.so.3 => /usr/lib/x86_64-linux-gnu/libk5crypto.so.3 (0x00007f129934c000)
libcom_err.so.2 => /lib/x86_64-linux-gnu/libcom_err.so.2 (0x00007f1299148000)
libkrb5support.so.0 => /usr/lib/x86_64-linux-gnu/libkrb5support.so.0 (0x00007f1298f3d000)
libresolv.so.2 => /lib/x86_64-linux-gnu/libresolv.so.2 (0x00007f1298d23000)
libsasl2.so.2 => /usr/lib/x86_64-linux-gnu/libsasl2.so.2 (0x00007f1298b08000)
libgssapi.so.3 => /usr/lib/x86_64-linux-gnu/libgssapi.so.3 (0x00007f12988c7000)
libp11-kit.so.0 => /usr/lib/x86_64-linux-gnu/libp11-kit.so.0 (0x00007f1298598000)
libtasn1.so.6 => /usr/lib/x86_64-linux-gnu/libtasn1.so.6 (0x00007f1298385000)
libkeyutils.so.1 => /lib/x86_64-linux-gnu/libkeyutils.so.1 (0x00007f1298181000)
libheimntlm.so.0 => /usr/lib/x86_64-linux-gnu/libheimntlm.so.0 (0x00007f1297f78000)
libkrb5.so.26 => /usr/lib/x86_64-linux-gnu/libkrb5.so.26 (0x00007f1297ceb000)
libasn1.so.8 => /usr/lib/x86_64-linux-gnu/libasn1.so.8 (0x00007f1297a49000)
libhcrypto.so.4 => /usr/lib/x86_64-linux-gnu/libhcrypto.so.4 (0x00007f1297813000)
libroken.so.18 => /usr/lib/x86_64-linux-gnu/libroken.so.18 (0x00007f12975fd000)
libffi.so.6 => /usr/lib/x86_64-linux-gnu/libffi.so.6 (0x00007f12973f5000)
libwind.so.0 => /usr/lib/x86_64-linux-gnu/libwind.so.0 (0x00007f12971cc000)
libheimbase.so.1 => /usr/lib/x86_64-linux-gnu/libheimbase.so.1 (0x00007f1296fbd000)
libhx509.so.5 => /usr/lib/x86_64-linux-gnu/libhx509.so.5 (0x00007f1296d73000)
libsqlite3.so.0 => /usr/lib/x86_64-linux-gnu/libsqlite3.so.0 (0x00007f1296a6a000)
libcrypt.so.1 => /lib/x86_64-linux-gnu/libcrypt.so.1 (0x00007f1296832000)ldd /usr/lib/x86_64-linux-gnu/libnxdb.so.36
ldd: /usr/lib/x86_64-linux-gnu/libnxdb.so.36: No such file or directoryThanks in advance
-
Looks like files from netxms-base package are missing - try to re-install it.
Best regards,
Victor -
-
apt install netxms-base
if it's already installed, try removing it first with
apt purge netxms-base -
Hi, Filipp. First I appreciate your time for help me. Second, Every thing is Ok. However, when
sudo apt-get install netxms-server netxms-dbdrv-pgsql
Additional steps required:
-
Edit default configuration file (/etc/netxmsd.conf) <----- Done !
-
Load database schema
nxdbmgr init <--- I have a question here. Do I have to do it or I do nxdbmgr upgrade. Because I started netXMS server without this step and It doesn't work
- Start daemon with command:
systemctl start netxms-server
The latest 3 lines of the file /var/log/netxmsd
2020.12.09 13:31:22.401 *I* [ ] Platform subagent "/usr/lib/x86_64-linux-gnu/netxms/linux.nsm" successfully loaded
2020.12.09 13:31:22.401 *E* [db.drv ] Unable to load database driver module "mysql.ddr": /usr/lib/x86_64-linux-gnu/netxms/dbdrv/mysql.ddr: cannot open shared object file: No such file or directoryThanks in Advance
-
-
Hey, Filipp. I found an installation procedure error. I fixed it and the netXMS server is up and running
josemb@hpserver1:~$ netxmsd -version
NetXMS Server Version 3.6.300 Build 3.6-300-g287f599693 (UNICODE)
NXCP: 5.53.1.29 (AES-256, Blowfish-256, 3DES, AES-128, Blowfish-128)
Built with: g++ (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0Thanks a lot to all netxms guys for your help. I appreciate a lot.
Best regards !
Jose
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login