Huawei switch - emty ports

[gorsvetto]

We have some Huawei switches ( S5735-XXXX). They are discovered by NetXMS using GENERIC driver.
Interfaces tab looks good, but :

• Ports tab is empty;
• FDB tab shows MAC addresses for VLAN 1 only;
• there is no port picture on VLANs tab.

Is there any solution or workaround for this problem ?

---

[zev]

Hi,
Looks like it is required to create driver for this type of devices. I wander if it possible to get remote access to this device (this way it is much faster to create and debug new driver)?

[gorsvetto]

Hi,
What kind of remote access do you need - SNMP, CLI ?

[victor]

SNMP is enough for testing the driver.

[lhpaladin]

+1 upvote for this vendor driver

[Spheron]

Hello @all,

having here a similar problem with a Netgear GS728TPv3.

Ports Tab ist empty, Interface List shows VLANs at wrong interface or VLAN fields are empty in interface List...

The correct values are:
VLAN1 is on port 1-18
VLAN2 is on port 19-24

NetXMS is using the GENRIC Driver.

Using here NetXMS V5.0.6 (Linux Debian / PostgreSQL)

Must i use a vendor driver for this switch type too?

Greetings
Marco 

 

---

[Filipp Sudanov]

@spheron said in Huawei switch - emty ports:

having here a similar problem with a Netgear GS728TPv3.

Any chances we can get remote access to your device for a few days? SNMP-only access is enough, it can be some test device not connected to real network

[Spheron]

@filipp-sudanov said in Huawei switch - emty ports:

@spheron said in Huawei switch - emty ports:

having here a similar problem with a Netgear GS728TPv3.

Any chances we can get remote access to your device for a few days? SNMP-only access is enough, it can be some test device not connected to real network

Hi Filipp,

sorry for the - very - late reply. Meanwhile Netgear released a new firmware with a vlan/snmp bugfix. After upgrade to newest switch firmware the VLAN infos in NetXMS are correct...

Greetings
Marco

[Filipp Sudanov]

Great, thanks for the update